CBEHub

← 4.1 Methods of joining sheet metal

The lap joint

Metal Technology · Grade 10 · about 40 minutes

The overlap joint that most sheet-metal work uses, why it is strong, and the one drawback of the step it leaves.

Sign in to read this lesson

Lessons are for learners and teachers with an account. Browsing the curriculum — subjects, strands and what each sub-strand covers — stays open to everyone.

  • 6 sections of explanation, worked examples and diagrams
  • 1 practice task with hints and worked answers
  • A quiz that marks itself as you go
  • Your progress kept across every subject you take
Sign in Create an account

Other lessons in this sub-strand

  1. Why sheet metal has to be joined
  2. What makes a joint a good one
  3. The butt joint
  4. The lap joint
  5. The grooved seam
  6. Other seams and where each is used
  7. Allowing metal for the seam
  8. How a rivet holds
  9. Rivet types and sizes
  10. Setting a rivet
  11. Rivet spacing and edge distance
  12. Pop rivets
  13. Bolts, nuts and screws in sheet
  14. Self-tapping and machine screws
  15. How soft soldering works
  16. Flux and preparing the surfaces
  17. Making a soldered joint
  18. Choosing a joining method
  19. Safety in sheet-metal joining
  20. A joining task: making a tray